How To Acquire a Let’s Encrypt Certificate Using DNS Validation with acme-dns-certbot on Ubuntu
Step 1 — Installing Certbot
In this step, you will install Certbot, which is a program used to issue and manage Let’s Encrypt certificates.
Certbot is available within the official Ubuntu Apt repositories, however, it is instead recommended to use the repository maintained by the Certbot developers, as this always has the most up-to-date version of the software.
Begin by adding the Certbot repository:
sudo apt-add-repository ppa:certbot/certbot
You’ll need to press ENTER to accept the prompt and add the new repository to your system.
Next, install the Certbot package:
sudo apt install certbot
Once the installation has completed, you can check that Certbot has been successfully installed:
certbot --version
This will output something similar to the following:
Output
certbot 0.31.0
In this step you installed Certbot. Next, you will download and install the acme-dns-certbot hook.
Step 2 — Installing acme-dns-certbot
Now that the base Certbot program has been installed, you can download and install acme-dns-certbot, which will allow Certbot to operate in DNS validation mode.
Begin by downloading a copy of the script:
wget https://github.com/joohoi/acme-dns-certbot-joohoi/raw/master/acme-dns-auth.py
Once the download has completed, mark the script as executable:
chmod +x acme-dns-auth.py
Then, edit the file using your favorite text editor and adjust the first line in order to force it to use Python 3:
nano acme-dns-auth.py
Add a 3 to the end of the first line:
#!/usr/bin/env python3
. . .
This is required in order to ensure that the script uses the latest supported version of Python 3, rather than the legacy Python version 2.
Once complete, save and close the file.
Finally, move the script into the Certbot Let’s Encrypt directory so that Certbot can load it:
sudo mv acme-dns-auth.py /etc/letsencrypt/
In this step, you downloaded and installed the acme-dns-certbot hook. Next, you can begin the setup process and work toward issuing your first certificate.
Step 3 — Setting Up acme-dns-certbot
In order to begin using acme-dns-certbot, you’ll need to complete an initial setup process and issue at least one certificate.
Start by running Certbot to force it to issue a certificate using DNS validation. This will run the acme-dns-certbot script and trigger the initial setup process:
sudo certbot certonly --manual --manual-auth-hook /etc/letsencrypt/acme-dns-auth.py
--preferred-challenges dns --debug-challenges -d \*.your-domain -d your-domain
You use the –manual argument to disable all of the automated integration features of Certbot. In this case you’re just issuing a raw certificate, rather than automatically installing it on a service as well.
You configure Certbot to use the acme-dns-certbot hook via the –manual-auth-hook argument. You run the –preferred-challenges argument so that Certbot will give preference to DNS validation.
You must also tell Certbot to pause before attempting to validate the certificate, which you do with the –debug-challenges argument. This is to allow you to set the DNS CNAME record(s) required by acme-dns-certbot, which is covered later in this step. Without the –debug-challenges argument, Certbot wouldn’t pause, so you wouldn’t have time to make the required DNS change.
Remember to substitute each of the domain names that you wish to use using -d arguments. If you want to issue a wildcard certificate, make sure to escape the asterisk (*) with a backslash ().
After following the standard Certbot steps, you’ll eventually be prompted with a message similar to the following:
Output
...
Output from acme-dns-auth.py:
Please add the following CNAME record to your main DNS zone:
_acme-challenge.your-domain CNAME a15ce5b2-f170-4c91-97bf-09a5764a88f6.auth.acme-dns.io.
Waiting for verification...
...
You’ll need to add the required DNS CNAME record to the DNS configuration for your domain. This will delegate control of the _acme-challenge subdomain to the ACME DNS service, which will allow acme-dns-certbot to set the required DNS records to validate the certificate request.
If you’re using DigitalOcean as your DNS provider, you can set the DNS record within your control panel:
A screenshot of the DigitalOcean DNS control panel, showing an example of a CNAME record for ACME DNS
It is recommended to set the TTL (time-to-live) to around 300 seconds in order to help ensure that any changes to the record are propagated quickly.
Once you have configured the DNS record, return to Certbot and press ENTER to validate the certificate request and complete the issuance process.
This will take a few seconds, and you’ll then see a message confirming that the certificate has been issued:
Output
...
Congratulations! Your certificate and chain have been saved at:
/etc/letsencrypt/live/your-domain/fullchain.pem
Your key file has been saved at:
/etc/letsencrypt/live/your-domain/privkey.pem
...
You’ve run acme-dns-certbot for the first time, set up the required DNS records, and successfully issued a certificate. Next you’ll set up automatic renewals of your certificate.
Step 4 — Using acme-dns-certbot
In this final step, you will use acme-dns-certbot to issue more certificates and renew existing ones.
Firstly, now that you’ve successfully issued at least one certificate using acme-dns-certbot, you can continue to issue certificates for the same DNS names without having to add another DNS CNAME record. However, if you wish to acquire a certificate for a different subdomain or entirely new domain name, you will be prompted to add another CNAME record.
For example, you could issue another standalone wildcard certificate without having to perform the verification again:
sudo certbot certonly --manual --manual-auth-hook /etc/letsencrypt/acme-dns-auth.py --preferred-challenges dns --debug-challenges -d \*.your-domain
However, if you were to attempt to issue a certificate for a subdomain, you would be prompted to add a CNAME record for the subdomain:
sudo certbot certonly --manual --manual-auth-hook /etc/letsencrypt/acme-dns-auth.py --preferred-challenges dns --debug-challenges -d subdomain.your-domain
This will show an output similar to the initial setup that you carried out in Step 3:
Output
...
Please add the following CNAME record to your main DNS zone:
_acme-challenge.subdomain.your-domain CNAME 8450fb54-8e01-4bfe-961a-424befd05088.auth.acme-dns.io.
Waiting for verification...
...
Now that you’re able to use acme-dns-certbot to issue certificates, it’s worth considering the renewal process as well.
Once your certificates are nearing expiry, Certbot can automatically renew them for you:
sudo certbot renew
The renewal process can run start-to-finish without user interaction, and will remember all of the configuration options that you specified during the initial setup.
To test that this is working without having to wait until nearer the expiry date, you can trigger a dry run. This will simulate the renewal process without making any actual changes to your configuration.
You can trigger a dry run using the standard renew command, but with the –dry-run argument:
sudo certbot renew --dry-run
This will output something similar to the following, which will provide assurance that the renewal process is functioning correctly:
Output
...
Cert not due for renewal, but simulating renewal for dry run
Plugins selected: Authenticator manual, Installer None
Renewing an existing certificate
Performing the following challenges:
dns-01 challenge for your-domain
dns-01 challenge for your-domain
Waiting for verification...
Cleaning up challenges
...
In this final step, you issued another certificate and then tested the automatic renewal process within Certbot.
My commands from https://www.digitalocean.com/community/tutorials/how-to-acquire-a-let-s-encrypt-certificate-using-dns-validation-with-acme-dns-certbot-on-ubuntu-18-04
wget https://github.com/joohoi/acme-dns-certbot-joohoi/raw/master/acme-dns-auth.py
chmod +x acme-dns-auth.py
nano acme-dns-auth.py
sudo mv acme-dns-auth.py /etc/letsencrypt/
sudo certbot certonly --manual --manual-auth-hook /etc/letsencrypt/acme-dns-auth.py --preferred-challenges dns --debug-challenges -d \*.aca.k12.or.us